Once a dentist has placed a restoration, the useful question stops being “when will it fail” and becomes “which teeth will it need to be replaced on first.” Longevity varies by a factor of four between the best and worst cases, and the biggest single predictor is not the material — it is where in the mouth the filling sits and how much biting force lands on it.
The numbers below come from published survival meta-analyses and from the clinical ranges practicing dentists quote for treatment planning. If you are trying to project when a replacement is due, you can put your own dates into our dental age calculator to see how old the existing work already is.
Median Survival by Material
Amalgam and direct composite are the two workhorses. Across long-term studies, both land in a similar band over the first decade, but they diverge after that — amalgam tends to hold longer in high-load areas while composite survives longer in esthetic zones where less force is applied.
| Material | Median survival (adults) | Expected range | Where it performs best |
|---|---|---|---|
| Amalgam | ~15 years | 9–22 years | Posterior molars under heavy load |
| Direct composite | ~10 years | 6–14 years | Premolars, anterior teeth, small lesions |
| Glass ionomer | ~6 years | 4–9 years | Root surfaces, low-stress sites, pediatric cases |
| Ceramic inlay/onlay | ~12 years | 8–18 years | Large posterior defects needing cuspal coverage |
| Gold onlay | ~20 years | 15–30 years | High-force molars in patients who grind |
Tooth Type Changes Everything
A molar absorbs roughly four to six times the occlusal load of an incisor during normal chewing, and ten or more times during clenching. A composite filling on a lower first molar therefore sees a very different service environment than an identical composite on a central incisor.
In practice, a small anterior composite placed at age 15 often lasts into the patient’s thirties without intervention. A large multi-surface molar restoration placed at 40 may need replacement by 50. The material did not change — the load spectrum did.
Age at Placement Is a Hidden Variable
Restorations placed in adolescence face decades of exposure, while a filling placed at 70 has a much shorter expected service life in absolute years before competing failure risks (root fracture, periodontal loss, the patient’s own remaining lifespan) take over. This is why survival curves are usually reported in two ways: years-to-failure and proportion still intact at 10 years.
For a 15-year-old receiving a composite, the probability of it remaining in service at age 25 is roughly 70–80% in most cohorts. For a 65-year-old receiving the same restoration, the proportion intact at 75 is similar, but the restoration no longer has to survive a 60-year horizon, so the practical replacement burden is far lower. Age context, not just material choice, drives how you should read survival tables.
What Actually Causes Failure
Filling failure is rarely a single event. Four mechanisms account for most replacements, and they cluster differently by decade of life.
- Marginal breakdown: bacteria infiltrate the seal between filling and tooth; the most common cause at any age.
- Fracture: the restoration or the cusp it supports cracks under load; rises sharply in grinders and after 50.
- Secondary caries: new decay develops at the margin; strongly tied to sugar frequency and dry mouth.
- Endodontic need: the tooth develops pulpitis or necrosis and needs a root canal, which often forces replacement of the existing filling regardless of its condition.
Estimating Your Own Replacement Window
A practical way to plan is to take the median survival for your material and tooth type, then adjust for your own risk factors. Heavy clenching, nocturnal grinding, a dry mouth from medication, high sugar exposure, and a history of multiple replacements on the same tooth all shorten the window. Excellent hygiene, fluoride exposure, regular checkups, and a night guard all extend it.
If your last molar restoration was placed in 2015 and you grind at night, a 10-year composite median puts replacement at roughly 2025 — which is now. If it was a small premolar composite, that same 2015 date may comfortably stretch into the late 2020s. Working from your actual placement year is far more useful than working from a general rule.
When Replacement Is Actually Due
Dentists generally replace a restoration when the margin has broken down enough to catch an explorer, when radiographs show recurrent decay under it, when a cusp has fractured, or when the tooth needs endodontic treatment. A worn but sealed filling is often left alone; cosmetic dissatisfaction alone is not a clinical reason to intervene.
That distinction matters for planning: the question “when will I need this replaced” has a clinical answer (when it fails) and a calendrical answer (when the median survival runs out). The calendrical answer is the one that helps you budget.
Frequently Asked Questions
Do amalgam fillings really need replacing after a set number of years? No fixed number applies. Older guidance suggested routine replacement of amalgam after 10–15 years, but current practice is to leave a serviceable, well-sealed restoration in place and monitor it.
Does removing mercury fillings improve health? Major health agencies, including the FDA and the WHO, have not found evidence that removing intact amalgam restorations improves health outcomes. Replacement is a clinical decision based on the restoration’s condition, not its material composition.
Is a crown better than a large filling for long-term durability? Once a restoration covers more than roughly half the width of a tooth, cuspal coverage (crown or onlay) generally has better long-term survival than another large direct filling, especially on molars.
If you want to see how many years your existing restorations have already logged, enter the placement dates into the age calculator on the main site and compare the result against the survival bands above.


